Perfume Crimp Pump Supplier

Perfume Crimp Pump Supplier for Fragrance and Fine Mist Packaging

As a Perfume Crimp Pump Supplier manufacturer, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.

GreenYard Tools Co.,ltd. is a China-based manufacturer of perfume crimp pumps and OEM aluminium crimp pump assemblies. We produce crimp-on and snap-on sprayer pumps for perfume, pillow mist, facial mist and similar low-viscosity liquids, with daily output of one million units across our moulding and automated assembly lines.

Our Crimp Pump range covers external-spring and standard internal-spring designs, aluminium and plastic shells, and multiple neck finishes. Each model is configured around the bottle neck, target dosage, tube length and filling line requirements.

What We Manufacture in the Crimp Pump Range

We supply crimp pumps as complete dispensing assemblies: actuator, spring, stem, gasket, dip tube and metal or plastic ferrule. The crimp-on ferrule is sealed to the bottle neck by the filling line, so the pump becomes a permanent, tamper-evident part of the pack.

• GY-401D1-WZ1 — external spring very fine mist perfume sprayer, 0.06ml dosage, sizes 15-400, 18-400, 20-400.
• GY-401C1 — aluminium customized thread perfume mist sprayer, 0.06ml dosage, 20-410, 24-410, 28-410.
• GY-401A — 0.06CC aluminium crimp-on perfume sprayer pump, 15mm, 18mm and 20mm.
• GY-403A1 — snap-on aluminium sprayer pump for compatible bottle necks.
• GY-608 series — 0.12CC aluminium and plastic mist sprayers in 24-410 and related finishes.

How Crimp Pumps Fit Perfume and Fine Mist Applications

Crimp pumps are used where the pack must stay sealed after filling and where spray quality defines the user experience. A 0.06ml dosage suits concentrated fragrance and facial mists; a 0.12ml dosage suits body mists and larger bottles where a fuller spray is wanted.

External-spring designs keep the metal spring outside the liquid path, which limits contact between the formula and metal components. This is relevant for fragrance concentrates, alcohol-based mists and formulas where odour or colour stability matters.

Critical Specifications We Confirm Before Production

Dosage, neck finish and tube length are the three variables that decide whether a crimp pump works on a given bottle and filling line. We confirm them against the bottle drawing and the filling equipment before releasing tooling or samples.

• Dosage: 0.06ml for fine fragrance mist; 0.12ml for fuller coverage.
• Neck finish: 15-400, 18-400, 20-400 crimp necks; 20-410, 24-410, 28-410 threaded versions.
• Tube length: cut to the bottle depth so the tube reaches the bottom without curling.
• Actuator: standard, wide or fine-mist orifice depending on spray pattern.
• Materials: aluminium ferrule and shell, PP and PE internal components, gasket material matched to the formula.

Configuration Options and Customization

We build crimp pumps to drawing or sample. Customization covers shell finish, thread or crimp dimension, tube length, gasket selection and actuator colour. Mould design and injection moulding are handled in-house, so a new shell profile or neck dimension can be developed as part of the project.

For brands that need a complete pack, we also supply matching Fine Mist Sprayer units, Lotion Pump heads and Airless Bottle formats so the dispensing system and container come from one production source.

Quality Control and Acceptance

Our quality system follows ISO 9001 from raw material intake through moulding, assembly and finished goods inspection. Key processes run at 90% automation, and batch qualification rate is maintained above 99.5%.

Inspection covers dosage consistency, spray pattern, leakage under crimp, actuator force, tube fit and appearance. Finished pumps are checked against the agreed specification before packing, and inspection records are kept for the batch.

Installation, Filling Line Integration and Maintenance

Crimp pumps are fitted on standard filling lines using a crimping head sized to the ferrule. The line must be set to the correct crimp diameter and pressure; under-crimping causes leakage and over-crimping can crack the ferrule or distort the actuator.

• Confirm bottle neck dimensions and crimp head compatibility before the first production run.
• Set crimp pressure and check seal integrity on the first units off the line.
• Store pumps in sealed bags away from dust and direct sunlight.
• Replace worn crimping heads on schedule to keep seal quality consistent.

Information We Use to Configure Your Solution

To prepare a crimp pump proposal we need the bottle neck specification, target dosage, tube length or bottle depth, formula type, filling line details and expected order quantity. Drawings or physical samples help us match the actuator and gasket quickly.

Our engineering team reviews the working point, material compatibility and production target, then returns a configuration with sample lead time and quotation. We are located 35km from Ningbo Port, which supports sea freight and air freight for urgent deliveries.

Frequently Asked Questions

What dosage options are available for perfume crimp pumps?

Our standard perfume crimp pumps deliver 0.06ml per stroke, and 0.12ml versions are available for body and hair mists. Dosage is fixed by the pump chamber, so it is selected at configuration stage.

Can you produce crimp pumps to match our bottle neck?

Yes. We manufacture 15-400, 18-400 and 20-400 crimp necks, plus 20-410, 24-410 and 28-410 threaded versions. Send the bottle drawing or a sample and we will confirm the matching ferrule and tube length.

Do you offer external spring designs?

Yes. The GY-401D1-WZ1 uses an external spring so the liquid path avoids metal contact. It also gives a softer press feel and a very fine mist for fragrance and facial mist products.

What is your production capacity for crimp pumps?

Our factory runs 60 injection moulding machines and 120 automatic assembly machines, with daily output of one million units across the sprayer and pump range.

How do you handle quality inspection?

Inspection is carried out after each production step, and finished pumps are checked for dosage, spray pattern, leakage and appearance. We operate an ISO 9001 quality management system and keep batch records.

Can you supply matching bottles and caps?

We produce a range of caps, bottles and dispensing pumps for daily chemical and cosmetic packaging, so a complete pack can be sourced from our factory. Share your pack concept and we will propose the matching components.